Test Suite
Jump to navigation
Jump to search
Nightly Test Tesults
Libreswan's testsuite is run nightly. The results are published here, with the most recent result here. The tests are categorized as:
- good: these tests are expected to pass (unfortunately, some still have timing problems and occasionally fail)
- wip: these tests require further work, for instance the result may not be deterministic, or the bug they demonstrate hasn't yet been fixed
- skiptest: these tests require manual intervention to run
To run tests locally, read on.
Running tests
The libreswan tests, in testing/pluto, can be run using several different mechanisms:
| Framework | Speed | Host OS | Guest OS | initsystem testing (systemd, rc.d, ...) | Post-mortem | Interop testing | Notes |
|---|---|---|---|---|---|---|---|
| KVM | slower | Fedora, Debian (BSD anyone?) |
Alpine, Fedora, FreeBSD, NetBSD, OpenBSD, Debian | yes | shutdown, core, leaks, refcnt, selinux | strongswan (Linux, FreeBSD), iked (OpenBSD), racoon (NetBSD), racoon2 (NetBSD) | gold standard ideal for BSD builds idea for testing custom kernels used by the Testing machine requires 9p (virtio anyone?) |
| Namespaces | fast | linux | uses host's libreswan, kernel, and utilities | no | core, leaks | strongswan (linux)? | ideal for quick tests requires libreswan to be built/installed on the host requires all dependencies to be installed on the host test results sensitive differing kernel and utilities |
| Docker | linux | uses host's kernel uses distro's utilities |
? | ? | ? | ideal for cross-linux builds (CentOS 6, 7, 8, Fedora 28 - rawhide, Debian, Ubuntu) sensitive to differing kernel and utilities |
How tests work
All the test cases involving VMs are located in the libreswan directory under testing/pluto/. The most basic test case is called basic-pluto-01. Each test case consists of a few files:
- description.txt to explain what this test case actually tests
- ipsec.conf files - for host west is called west.conf. This can also include configuration files for strongswan or racoon2 for interop testig
- ipsec.secret files - if non-default configurations are used. also uses the host syntax, eg west.secrets, east.secrets.
- An init.sh file for each VM that needs to start (eg westinit.sh, eastinit.sh, etc)
- One run.sh file for the host that is the initiator (eg westrun.sh)
- Known good (sanitized) output for each VM (eg west.console.txt, east.console.txt)
- testparams.sh if there are any non-default test parameters
Once the test run has completed, you will see an OUTPUT/ directory in the test case directory:
$ ls OUTPUT/ east.console.diff east.console.verbose.txt RESULT west.console.txt west.pluto.log east.console.txt east.pluto.log swan12.pcap west.console.diff west.console.verbose.txt
- RESULT is a text file (whose format is sure to change in the next few months) stating whether the test succeeded or failed.
- The diff files show the differences between this testrun and the last known good output.
- Each VM's serial (sanitized) console log (eg west.console.txt)
- Each VM's unsanitized verbose console output (eg west.console.verbose.txt)
- A network capture from the bridge device (eg swan12.pcap)
- Each VM's pluto log, created with plutodebug=all (eg west.pluto.log)
- Any core dumps generated if a pluto daemon crashed
- testing/baseconfigs/
- configuration files installed on guest machines
- testing/guestbin/
- shell scripts used by tests, and run on the guest
- testing/linux-system-roles.vpn/
- ???
- testing/packaging/
- ???
- testing/pluto/TESTLIST
- list of tests, and their expected outcome
- testing/pluto/*/
- individual test directories
- testing/programs/
- executables used by tests, and run on the guest
- testing/sanitizers/
- filters for cleaning up the test output
- testing/utils/
- test drivers and other host tools
- testing/x509/
- certificates, scripts are run on a guest
Network Diagrams
Current Network Diagram
- interface-0 (eth0, vio0, vioif0) is connected to SWANDEFAULT which has a NAT gateway to the internet
- the exceptions are the Fedora test domains: EAST, WEST, ROAD, NORTH; should they?
- the BSD domains always up inteface-0 so that /pool, /source, and /testing can be NFS mounted
- NIC needs to run DHCP on eth0 manually; how?
- transmogrify does not try to modify interface-0(SWANDEFAULT) (it breaks established network sessions such as NFS)
- the interface names do not have consistent order (see comment above about Fedora's interface-0 not pointing at SWANDEFAULT)
- Fedora has ethN
- OpenBSD has vioN (different order)
- NetBSD has vioifN (different order)
LEFT RIGHT
192.0.3.0/24 -------------------------------------+-- 2001:db8:0:3::/64
|
2001:db8:0:3::254
192.0.3.254(eth0/2)
ROAD NORTH
192.1.3.209(eth0/1) 192.1.3.33(eth1)
2001:db8:1:3::209 2001:db8:1:3::33
| |
192.1.3.0/254 ----+----------------+--------------+-- 2001:db8:1:3::/64
|
2001:db8:1:3::254
192.1.3.254(eth2)
NIC---swandefault(0)
192.1.2.254(eth1)
2001:db8:1:2::254
|
192.1.2.0/24 ---+------------------+-------------+--- 2001:db8:1:2::/64
| |
2001:db8:1:2::45 2001:db8:1:2::23
192.1.2.45(eth1) 192.1.2.23(eth1)
WEST---[swandefault(0)] EAST---[swandefault(0)]
192.0.1.254(eth0/2) 192.0.2.254(eth0/2)
2001:db8:0:1::254 2001:db8:0:2::254
| |
| TEST-NET-1
| 192.0.2.0/255 ---+--- 2001:db8:0:2::/64
|
192.0.1.0/255 --+------------------------------------ 2001:db8:0:1::/64
Proposed Network Diagram
Changes:
- add NOC, unlike NIC can run libreswan
- add SUNRISE (behind east) and SUNSET (behind west)
Notes:
- if0 (eth0, vio0, vioif0) is connected to SWANDEFAULT which has a NAT gateway to the internet
- the exceptions are the Fedora test domains: EAST, WEST, ROAD, NORTH; should they?
- the BSD domains use if0 to NFS mount /bench, /pool, /source, and /testing
- NIC needs to run DHCP on eth0 manually; how?
- transmogrify does not try to modify if0(SWANDEFAULT) (it breaks established network sessions such as NFS)
- the interface names still do not have consistent order
- ifN denotes a consistent numbering
- ethN denotes Fedora only assignment
- bsdN denotes a BSD only assignment (FreeBSD has ???N, NetBSD has vioifN, OpenBSD has vioN)
- re-number networks so that they are RFC friendly, these RFCs came up in discussion; alternatively do nothing
192.0.3.0/24 ----------------- ?? -----------------+---- 2001:db8:0:3::/64
|
2001:db8:0:3::254
192.0.3.254
<eth0/2>
ROAD NORTH
<eth0/1> <eth1>
192.1.3.209 192.1.3.33
2001:db8:1:3::209 2001:db8:1:3::33
| |
192.1.3.0/254 ----+---+--------- ?? ------------+---+---- 2001:db8:1:3::/64
| |
2001:db8:1:3::254 2001:db8:1:3::253
192.1.3.254(eth2) 192.1.3.253
<eth2> <eth2>
NIC-<if0>-swandefault NOC-<if0>-swandefault
<eth1> <eth1>
192.0.2.254 192.0.2.253
2001:db8:192:0:2::254 2001:db8:192:0:2::253
| |
192.0.2.0/24 -----+--+---- TEST-NET-1 ---------+--+---- 2001:db8:192.0.2::/64
| |
2001:db8:192:0:2::45 2001:db8:192:0:2::23
192.0.2.45 192.0.2.23
<eth1> <eth1>
WEST EAST
<eth0> <eth0/2>
10.2.45.254 10.2.23.254
2001:db8:10:2:45::254 2001:db8:10:2:23::254
| |
10.2.23.0/24 ---- | ---- Private-Use -----------+--+- 2001:db8:10:2:23::/64
| |
| 2001:db8:10:2:23::252
| 10.2.23.252
| <eth1>
| ${OS}E-<eth0>-swandefault
|
10.2.45.0/24 +--+--+------- Private-Use -----------------2001:db8:10:2:45::/64
|
2001:db8:10:2:45::252
10.2.45.252
<if1>
${OS}W-<if0>-swandefault
Hand Sketch of Current Network
Original Network Diagram
