Test Suite

Nightly Test Tesults

Libreswan's testsuite is run nightly. The results are published here, with the most recent result here. The tests are categorized as:

• good: these tests are expected to pass (unfortunately, some still have timing problems and occasionally fail)
• wip: these tests require further work, for instance the result may not be deterministic, or the bug they demonstrate hasn't yet been fixed
• skiptest: these tests require manual intervention to run

To run tests locally, read on.

Running tests

The libreswan tests, in testing/pluto, can be run using several different mechanisms:

Test Frameworks

Framework	Speed	Host OS	Guest OS	initsystem testing (systemd, rc.d, ...)	Post-mortem	Interop testing	Notes
KVM	slower	Fedora, Debian (BSD anyone?)	Alpine, Fedora, FreeBSD, NetBSD, OpenBSD, Debian	yes	shutdown, core, leaks, refcnt, selinux	strongswan (Linux, FreeBSD), iked (OpenBSD), racoon (NetBSD), racoon2 (NetBSD)	gold standard ideal for BSD builds idea for testing custom kernels used by the Testing machine requires 9p (virtio anyone?)
Namespaces	fast	linux	uses host's libreswan, kernel, and utilities	no	core, leaks	strongswan (linux)?	ideal for quick tests requires libreswan to be built/installed on the host requires all dependencies to be installed on the host test results sensitive differing kernel and utilities
Docker		linux	uses host's kernel uses distro's utilities	?	?	?	ideal for cross-linux builds (CentOS 6, 7, 8, Fedora 28 - rawhide, Debian, Ubuntu) sensitive to differing kernel and utilities

How tests work

All the test cases involving VMs are located in the libreswan directory under testing/pluto/. The most basic test case is called basic-pluto-01. Each test case consists of a few files:

• description.txt to explain what this test case actually tests
• ipsec.conf files - for host west is called west.conf. This can also include configuration files for strongswan or racoon2 for interop testig
• ipsec.secret files - if non-default configurations are used. also uses the host syntax, eg west.secrets, east.secrets.
• An init.sh file for each VM that needs to start (eg westinit.sh, eastinit.sh, etc)
• One run.sh file for the host that is the initiator (eg westrun.sh)
• Known good (sanitized) output for each VM (eg west.console.txt, east.console.txt)
• testparams.sh if there are any non-default test parameters

Once the test run has completed, you will see an OUTPUT/ directory in the test case directory:

$ ls OUTPUT/
east.console.diff  east.console.verbose.txt  RESULT       west.console.txt          west.pluto.log
east.console.txt   east.pluto.log            swan12.pcap  west.console.diff  west.console.verbose.txt

• RESULT is a text file (whose format is sure to change in the next few months) stating whether the test succeeded or failed.
• The diff files show the differences between this testrun and the last known good output.
• Each VM's serial (sanitized) console log (eg west.console.txt)
• Each VM's unsanitized verbose console output (eg west.console.verbose.txt)
• A network capture from the bridge device (eg swan12.pcap)
• Each VM's pluto log, created with plutodebug=all (eg west.pluto.log)
• Any core dumps generated if a pluto daemon crashed

testing/baseconfigs/

configuration files installed on guest machines

testing/guestbin/

shell scripts used by tests, and run on the guest

testing/linux-system-roles.vpn/

???

testing/packaging/

???

testing/pluto/TESTLIST

list of tests, and their expected outcome

testing/pluto/*/

individual test directories

testing/programs/

executables used by tests, and run on the guest

testing/sanitizers/

filters for cleaning up the test output

testing/utils/

test drivers and other host tools

testing/x509/

certificates, scripts are run on a guest

Network Diagram

• interface-0 (eth0, vio0, vioif0) is connected to SWANDEFAULT which has a NAT gateway to the internet
  • the exceptions are the Linux test domains: EAST, WEST, ROAD, NORTH; should they?
  • the BSD domains always up inteface-0 so that /pool, /source, and /testing can be NFS mounted
  • NIC needs to run DHCP on eth0 manually; how?
  • transmogrify does not try to modify interface-0(SWANDEFAULT) (doing so would break established network sessions such as NFS)
• the interface names do not have consistent order (see comment above about Fedora's interface-0 not pointing at SWANDEFAULT)
  • Fedora has ethN
  • OpenBSD has vioN (different order)
  • NetBSD has vioifN (different order)

 LEFT                                                              RIGHT

 192.0.3.0/24 -------------------------------------+-- 2001:db8:0:3::/64
                                                   |
                                           2001:db8:0:3::254
                                              192.0.3.254(eth0)
                 ROAD                            NORTH
              192.1.3.209(eth0)             192.1.3.33(eth1)
           2001:db8:1:3::209             2001:db8:1:3::33
                   |                               |
 192.1.3.0/24 -----+----------------+--------------+-- 2001:db8:1:3::/64
                                    |
                            2001:db8:1:3::254
                               192.1.3.254(eth2)
                                   NIC---swandefault(0)
                             192.1.2.254(eth1)
                            2001:db8:1:2::254
                                    |
 192.1.2.0/24 ---+------------------+-------------+--- 2001:db8:1:2::/64
                 |                                |
         2001:db8:1:2::45                 2001:db8:1:2::23
          192.1.2.45(eth1)                 192.1.2.23(eth1)
               WEST                             EAST
          192.0.1.254(eth0)              192.0.2.254(eth0)
         2001:db8:0:1::254                2001:db8:0:2::254
                 |                                |
                 |                           TEST-NET-1
                 |               192.0.2.0/24 ----+--- 2001:db8:0:2::/64
                 |
 192.0.1.0/24 ---+------------------------------------ 2001:db8:0:1::/64

Problems with the existing Network

The current network has a number of limitations. This section identifies those problems and proposes changes to address them:

• the network addresses being used are not really suitable for use in documentation

the gateway had only 128 DHCP addresses

192.168.234.0/24 (gateway) is reserved for private use networks

192.0.1.0/24 is owned by elevatedcomputing.com

192.1.2.0/24 is owned by raytheon.com

192.1.3.0/24 is owned by raytheon.com

• see

see https://www.rfc-editor.org/rfc/rfc5737

https://www.rfc-editor.org/rfc/rfc3849

https://www.rfc-editor.org/rfc/rfc6890

• two hosts, each behind a gateway, where the gateway's are connected using IPsec

HOST-<unencrypted>-GATEWAY-<IPsec>-GATEWAY-unencrypted>-HOST

• tests try to mimic this by injecting packets into gateway's internal interface, however it isn't the same

• the OS specific VMs (NetBSD, Alpine, Debian, FreeBSD, OpenBSD, Fedora) have no consistent home

currently they are kind of like east, west, and north

The suggestions are:

• use the benchmarking network

198.18.0.0/15

• reserve 198.19/16 for the gateway
• revive rise (behind east) and set (behind west)
• reserve a number N for each machine / network

2 = 1198.18.2

3 = 1198.18.3

23 = EAST

45 = WEST

22 = rise

44 = set

33 = north

209 = north

254 = NIC

• reserve subnets to each machine

198.18.N.N/24 is the back interface

198.18.1N.N/24 is the ipsec iface

 LEFT                                                     RIGHT

 198.18.254.0/24 ----------------------------------+------ 2001:db8:254::/64
                                                   |
                                           2001:db8:254::254
                                              198.18.254.254(eth0)
                      ROAD                       NORTH
                  198.18.3.209(eth0)         198.18.3.33(eth1)
                2001:db8:3::209            2001:db8:3::33
                        |                          |
 198.18.3.0/254 --------+----------------+---------+------ 2001:db8:3::/64
                                         |
                                 2001:db8:3::254
                                    198.18.3.254(eth2)
                                        NIC---swandefault(0)
                                   198.18.2.254(eth1)
                                 2001:db8:2::254
                                         |
                                         |
 198.18.2.0/24 ----------------+---------+-------------------+----- 2001:db8:2::/64
                               |                             |
                       2001:db8:2::45                2001:db8:2::23
                         198.18.2.45(eth1)             198.18.2.23(eth1)
  192.18.245.45/24(ipsec1)--$(OS)W                       ${OS}E--198.18.223.23/24(ipsec1)
                              WEST                          EAST
                         198.18.45.45(eth0/2)          198.18.23.23(eth0/2)
                       2001:db8:145::45               2001:db8:123::23
                               |                             |
                               |                             |
                               |     192.18.23.0/24 ---------+---+--- 2001:db8:23::/64
                               |                                 |
                               |                         2001:db8:23::22/64
                               |                           198.18.23.22/24(if1)
                               |                            ${OS}RISE
                               |
 198.18.45.0/24 -----------+---+------ 2001:db8:45::/64
                           |
                   2001:db8:45::44/64
                     198.18.45.44/24(if1)
                       ${OS}SET

The changes are as follows:

Hand Sketch of Current Network

Original Network Diagram