Documentation: Libreswan Opportunistic IPsec using LetsEncrypt

Introduction

letsencrypt invokes several of the utilities involved in controlling the Opportunistic Encryption system, running the specified {command} with the specified [argument] as if it had been invoked directly. More information about the utility is available at Libreswan Opportunistic IPsec using LetsEncrypt .

Prerequisite

The following packages are required to avail full features of the `letsencrypt` program:

1. IPsec - Libreswan

2. certutil

3. wget

4. certbot *

5. openssl *

* Required only for hosts acting as servers. Not required for hosts acting as clients.

Installation

To use the program one needs to have IPsec (Libreswan) installed. Libreswan installation instructions are available here

Available [arguments]

ipsec letsencrypt [arguments]

Available [arguments]

-server, -client, test, generatecertificate hostname, updatecertificate hostname, help, -t, -gc hostname, -uc hostname, -h

Note - To get the list of all acceptable arguments run ipsec letsencrypt -h OR ipsec letsencrypt help

Configuration Used

There are 2 default configurations, one for the server (oe-letsencrypt-server.conf) and other for the client (oe-letsencrypt-client.conf).

1. The server configuration (oe-letsencrypt-server.conf) is as follows:

conn clear-or-private
	leftid=%fromcert
	leftrsasigkey=%cert
	# nickname of your letsencrypt certificate imported to NSS
	leftcert=letsencrypt.libreswan.org
	leftauth=rsasig
	left=%defaultroute
	#leftmodecfgclient=yes
	#
	rightid=%null
	rightauth=null
	right=%opportunisticgroup
	#
	negotiationshunt=passthrough
	failureshunt=passthrough
	type=tunnel
	ikev2=insist
	sendca=issuer
	auto=add
	#
	rightaddresspool=100.64.0.1-100.64.255.254
	rightmodecfgclient=yes

2. The client configuration (oe-letsencrypt-client.conf) is as follows:

conn private-or-clear
	rightid=%fromcert
	rightrsasigkey=%cert
	rightauth=rsasig
	right=%opportunisticgroup
	rightmodecfgclient=yes
	rightcat=yes
	# Any CA will do because we only load the LetsEncrypt CA
	rightca=%any
	#
	left=%defaultroute
	leftid=%null
	leftauth=null
	leftmodecfgclient=yes
	leftcat=yes
	#
	narrowing=yes
	type=tunnel
	ikev2=insist
	negotiationshunt=drop
	failureshunt=passthrough
	keyingtries=1
	retransmit-timeout=3s
	auto=ondemand

Functions of various [arguments]

Note - OE refers to Opportunistic Encryption.

1. ipsec letsencrypt -client OR ipsec letsencrypt -server

For the initial setup, it is to be run when installing the project for the first time. This [argument] performs the following tasks:

• performs the 1st time server/client Installation.
• checks if the command is run as root.
• Sets and restores the secure umask at appropriate locations.
• Creates temporary directories for downloading the certificates.
• Checks for any existing OE connections.
• Downloads the LetsEncrypt CA and intermediate certificates.
• Checks if NSS database exists.
• Initializes the NSS database and import the LetsEncrypt certificates in it.
• Saves the required client/server configuration in the /etc/ipsec.d directory.
• Restores the security context of the saved configuration using restorecon (if it is available on the system).
• Establishes a secure OE connection by sending pings to the letsencrypt.libreswan.org server.
• Checks for the success of establishing the OE connection.
• Displays OE connection status to user.

Sample Output -

[root@linux]# ipsec letsencrypt -client
Installing for Client.
Downloading the letsencrypt certificates
Importing the downloaded certificates into the database
Saving the required configuration
cp: cannot stat '@FINALDOCDIR@/examples/oe-letsencrypt-client.conf': No such file or directory
Sending ping(IPv4) to letsencrypt.libreswan.org server.
OE Connection established successfully.
006 #4: "private-or-clear#193.110.157.131/32"[2] 100.64.0.1/32=== ...193.110.157.131, type=ESP, add_time=1565535553,
inBytes=0, outBytes=252, id='CN=letsencrypt.libreswan.org', lease=100.64.0.1/32

2. ipsec letsencrypt test OR ipsec letsencrypt -t

For testing the configuration/connections. This [argument] checks for the success of establishing an OE connection, and performs the following tasks:

• Check for any existing OE connections.
• checks if the command is run as root.
• Establish an OE connection.
• Sending pings to the letsencrypt.libreswan.org server.
• Checking the success of establishing OE connection.
• Displaying connection status to the user.

Sample Output -

[root@linux]# ipsec letsencrypt -t
Existing OE Connections Found. Please stop the connections using 'ipsec restart' and try again.
006 #4: "private-or-clear#193.110.157.131/32"[2] 100.64.0.1/32=== ...193.110.157.131, type=ESP, add_time=1565535553,
inBytes=0, outBytes=252, id='CN=letsencrypt.libreswan.org', lease=100.64.0.1/32

3. ipsec letsencrypt generatecertificate hostname OR ipsec letsencrypt -gc hostname

Note - hostname refers to the name of the host. e.g. libreswan.org.

For generating the certificate. This [argument] is used for Generating the certificate using Certbot, and performing the following tasks:

• Check if certbot is installed.
• checks if the command is run as root.
• Sets and restores the secure umask at appropriate locations.
• Creates temporary directories for downloading the certificates.
• Generating #pkcs12 file and importing it in the nss database.
• Displays the certificates installed in nss database.
• Generates the certbot configuration for reusing the private key.
• Creates a crontab for automatic certificate renewals.

Sample Output -

[root@linux]# ipsec letsencrypt -gc letsencrypt.org
Saving debug log to /var/log/letsencrypt/letsencrypt.log
Plugins selected: Authenticator webroot, Installer None
Starting new HTTPS connection (1): acme-v02.api.letsencrypt.org
Please enter in your domain name(s) (comma and/or space separated)  (Enter 'c'
to cancel): letsencrypt.libreswan.org
Cert not yet due for renewal

You have an existing certificate that has exactly the same domains or certificate name you requested and isn't close to expiry.
(ref: /etc/letsencrypt/renewal/letsencrypt.libreswan.org.conf)

What would you like to do?
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1: Keep the existing certificate for now
2: Renew & replace the cert (limit ~5 per 7 days)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Select the appropriate number [1-2] then [enter] (press 'c' to cancel): 2
Renewing an existing certificate

IMPORTANT NOTES:
 - Congratulations! Your certificate and chain have been saved at:
   /etc/letsencrypt/live/letsencrypt.libreswan.org/fullchain.pem
   Your key file has been saved at:
   /etc/letsencrypt/live/letsencrypt.libreswan.org/privkey.pem
   Your cert will expire on 2019-11-03. To obtain a new or tweaked
   version of this certificate in the future, simply run certbot
   again. To non-interactively renew *all* of your certificates, run
   "certbot renew"
 - If you like Certbot, please consider supporting our work by:

   Donating to ISRG / Let's Encrypt:   https://letsencrypt.org/donate
   Donating to EFF:                    https://eff.org/donate-le

Enter Export Password:
Verifying - Enter Export Password:
Importing the certificate in database.
Enter password for PKCS12 file:
pk12util: PKCS12 IMPORT SUCCESSFUL

Certificate Nickname                                         Trust Attributes
                                                             SSL,S/MIME,JAR/XPI

isrgrootx1                                                   CT,,
trustid-x3-root                                              CT,,
letsencryptauthorityx3                                       ,,   
lets-encrypt-x3-cross-signed                                 ,,   
letsencrypt.libreswan.org                                    u,u,u
To confirm the success try running 'ipsec letsencrypt -t' on the client

4. certbot renew --deploy-hook 'ipsec letsencrypt -ug hostname'

Note - hostname refers to the name of the host. e.g. libreswan.org.

For updating the generated certificate (keeping the private key same). This [argument] is used to update the certificate keeping the private key same, and performs the following tasks:

• checks if the command is run as root.
• Updating the certificate using Certbot keeping the private key same.
• Sets and restores the secure umask at appropriate locations.
• Creates temporary directories for downloading the certificates.
• Generating #pkcs12 file.
• Importing the certificate in nss database.
• Displaying the certificates installed in nss database.
• Restarting the IPsec to load the latest updated certificate.

Sample Output -

[root@linux]# certbot renew --deploy-hook 'ipsec letsencrypt -ug letsencrypt.org'
Saving debug log to /var/log/letsencrypt/letsencrypt.log

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Processing /etc/letsencrypt/renewal/letsencrypt.libreswan.org.conf
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cert not yet due for renewal

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

The following certs are not due for renewal yet:
  /etc/letsencrypt/live/letsencrypt.libreswan.org/fullchain.pem expires on 2019-11-03 (skipped)
No renewals were attempted.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Enter Export Password:
Verifying - Enter Export Password:
Importing the certificate in the database.
Enter password for PKCS12 file:
pk12util: PKCS12 IMPORT SUCCESSFUL
Displaying the certificates installed in the database.

Certificate Nickname                                         Trust Attributes
                                                             SSL,S/MIME,JAR/XPI

isrgrootx1                                                   CT,,
trustid-x3-root                                              CT,,
letsencryptauthorityx3                                       ,,   
lets-encrypt-x3-cross-signed                                 ,,   
letsencrypt.libreswan.org                                    u,u,u
To confirm the success try running 'ipsec letsencrypt -t' on the client

5. ipsec letsencrypt -h OR ipsec letsencrypt help

For providing information regarding various {commands} and [arguments].

Sample Output -

[root@linux]# ipsec letsencrypt -h
Usage: ipsec letsencrypt [arguments]
Available [arguments]
-server, -client, test, generatecertificate hostname, updatecertificate hostname, help, -t, -gc hostname, -uc hostname, -h

-server, -client :  For initial server/client setup.
usage: 'ipsec letsencrypt -client' OR 'ipsec letsencrypt -server'

test, -t  :  For testing the configuration/connections.
usage: 'ipsec letsencrypt test' OR 'ipsec letsencrypt -t'

generatecertificate hostname, -gc hostname :  For generating the certificate.
usage: 'ipsec letsencrypt generatecertificate hostname' OR 'ipsec letsencrypt -gc hostname'

For updating the generated certificate (keeping the private key same) use the following command.
usage: certbot renew --deploy-hook 'ipsec letsencrypt -ug hostname'